> For the complete documentation index, see [llms.txt](https://docs.lemonrotools.com/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://docs.lemonrotools.com/autopot/configuration/hp-sp-and-berry.md).
# HP, SP and Berry
The Autopot's priority is dynamic due to its **Smart Algorithm**, it constantly analyzes your game in order to know when it's safe to use Status, HP and/or SP potions, even on situations where your HP/SP is low.
The berry is always the top priority because it's meant to be used as a last resource when you are about to die.
The normal priority order is as follows:
Berry -> Status -> HP -> SP
{% hint style="info" %}
The images are only a visual reference, you can use **any item/skill** as long as it is in the key you configured.
{% endhint %}
## 1. Configuring the percentages
Autopot's Percentages
Each percentage tells each part of the autopot when to start/stop using potions, there are 3 percentages you can configure:
Bound to your **HP**
Bound to your **SP**
Bound to your **HP**
{% hint style="info" %}
The percentage will tell the Autopot when to start/stop using potions. For example using 80% on  will make the Autopot use potions until your HP is 80% or higher.
{% endhint %}
### Steps to configure the percentages
1. **Click** on the percentage rectangle.
2. **Write** the percentage you want.
{% hint style="info" %}
You can skip the percentages of the parts you don't want. For example if you won't use the SP part then you can leave its percentage blank.
{% endhint %}
Configured Autopot's percentages
In the image above you can see the Autopot is configured to start using HP potions when the HP falls below 95% and SP potions when the SP falls below 50%.
In this example the Berry part won't be used so its percentage is left blank.
{% hint style="success" %} **Pro tip**: if you are playing **WoE**, **BG** or **PvP** it's better to use a high percentage on both your HP and SP. (I usually use 95% for HP and 80% for SP for **WoE**)
While a high SP value might make you die on other Autopots, this doesn't happen with Lemon Tools. Thanks to Lemon Tools' smart algorithms you can use a high value on both without dying, allowing you to always have SP to cast skills (even when your HP is low).
{% endhint %}
## 2. Configuring the keybinds
Autopot's keybinds
There are 3 keybinds you can configure:
Used for **HP** potions
Used for **SP** potions
Used for **Berries**
These keybinds will tell Lemon Tools what key to press when your HP/SP drops.
{% hint style="info" %}
The images are only a visual reference, you can use any item/skill as long as it is in the key you configured.
{% endhint %}
### Steps to configure the keybinds
1. **Click** on the keybind rectangle.
2. **Press** the key where you have the item to be used.
{% hint style="info" %}
You can skip the keybinds of the parts you don't want. For example if you won't use the HP part then you can leave the HP keybind blank.
{% endhint %}
Configured Autopot's keybinds
In the image above you can see the Autopot is configured to use **F1** for HP potions and **F2** for Berries.
This means Lemon Tools will press **F1** when your HP drops below 95%, and **F2** when your HP drops below 50%.
In this example the SP part won't be used so its keybind is left blank.
## 3. Configuring the delays
Autopot's delays
There are 3 delays you can configure:
Used for **HP** potions
Used for **SP** potions
Used for **Berries**
{% hint style="warning" %} **IMPORTANT:** Only configure these delays when your server has **cooldowns** configured for consumables. If not then **leave them blank**, this will let Lemon Tools figure out the proper delays. Read more about this below on [#when-to-use-a-delay-other-than-0](#when-to-use-a-delay-other-than-0 "mention")
{% endhint %}
### Steps to configure the delays
1. **Click** on the delay rectangle.
2. **Write** the delay you want in milliseconds (1000ms = 1s)
{% hint style="info" %}
Leaving a delay blank is the same as having 0ms as delay.
{% endhint %}
Configured Autopot's delays
In the image above you can see the Autopot is configured with 0ms on HP and SP and 5100ms (5.1 seconds) on Berries.
This means that Lemon Tools will wait 5100ms between each Berry use attempt.
### When to use a delay other than 0
It's common for some servers to add high cooldowns on items like Berries, in this case you will want to configure the delay to match that cooldown so that Lemon Tools only tries to use a Berry when it's available. \
For example if your server has a 3 second cooldown for Berries then you should use a delay of around 3050ms so that Lemon Tools will try to use a Berry only when it's available.
{% hint style="warning" %} **IMPORTANT:** Only configure these delays when your server has **cooldowns** configured for consumables. If not then leave them blank, this will let Lemon Tools figure out the proper delays.
{% endhint %}
---
# Agent Instructions
This documentation is published with GitBook. GitBook is the documentation platform designed so that both humans and AI agents can read, navigate, and reason over technical content effectively. Learn more at gitbook.com.
## Querying This Documentation
If you need additional information that is not directly available in this page, you can query the documentation dynamically by asking a question.
Perform an HTTP GET request on the current page URL with the `ask` query parameter:
```
GET https://docs.lemonrotools.com/autopot/configuration/hp-sp-and-berry.md?ask=
```
The question should be specific, self-contained, and written in natural language.
The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.
Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.